ADTMZ001-EN

User Manual


Overview


*An Adaprox Zigbee Bridge is required to connect the thermometer to the network.

App Installation

Adaprox Home App is the mobile platform for controlling Adaprox devices. You can search "Adaprox Home" in the mobile application store to install the App.


Activate the Device

Rotate the battery cover anticlockwise to open. Then remove the battery insulation film to power on the product, the red LED will flash slowly for self-checking.

After powered on, the product will enter self-checking state and the red LED will flash for 60s. 

Device Pairing

Press the reset button for 5 seconds then release, the device is ready to be paired when the signal icon flashes. 

Open the App and click the "+" button on the upper right corner, then click the thermometer button in the "Add a device" panel and follow the instructions in the app to pair the device.

After the thermometer is paired, you can long press the device button in the main page of the App to inspect thermometer status and view alarm history.

Device Installation

Installation method 1: Use a 3M sticker to affix the product to the target position.

Installation method 2: Place the product on the support.

Automation

The automation function is available in the App to connect different devices. Each automation contains a series of trigger conditions and target actions. The target actions will be automatically triggered when the conditions are met.

To set up an automation, click the “+” button in the upper right corner at the automation page. You can use the thermometer as a trigger condition and create target actions with other Adaprox appliances. 


Voice Assistant Setup
Connect your Adaprox smart devices to third-party voice assistants such as Apple Siri, Google Home and Amazon Alexa for more convenient experience.
How to setup >
Software Guides
Get quick guides to master Adaprox Home App. Learn how to create a virtual group and setup home automation in seconds.
How to use >
Display and report temperater and humidity
Buy